小型农产品分选机设计与试验

针对家庭农场及小规模营销的需要,设计了基于机器视觉的小型农产品分选机。农产品在平胶带上形成多通道阵列式输送,以DSP作为机器视觉单元的核心,采集一帧图像可分析多个通道,并根据农产品的形状、颜色等图像特征进行分选。在水平输送速度为9.2 cm/s、农产品输送间隔为16 cm、4通道并行输送的条件下,选用核桃、红枣及栗子3种农产品进行了分选机性能测试。试验表明,机器能够可靠工作;核桃、红枣和栗子的分选准确性分别为91.66%、94.79%和97.39%;分选速度达8 800个/h。因此采用DSP芯片作为小型分选机的机器视觉核心是可行的,可以为农产品分选机的小型化、低成本提供技术支持。     

基于距离反比法的土壤盐分三维空间插值研究

以新疆兵团一块面积约70 hm2的盐碱地为研究对象,采用EM38与土钻取样相结合的方法得到了126个点不同土层(0~200 cm)的1 386个土壤盐分数据,应用三维距离反比法(3D-IDW)对土壤盐分进行了空间插值,探讨了垂向坐标扩大倍数和搜索点数对插值结果精度的影响。结果表明,研究区0~140 cm土层盐分平均含量较高,为1.84~2.11 g/kg,盐分变异较大,而140~200 cm土层盐分平均含量较低,为1.74~1.79 g/kg。所有土层盐分含量的统计特征值(平均值、标准差和变异系数等)均随土层加深而呈现递减的趋势。土壤盐分实测值和估计值的均方根误差随垂向坐标扩大倍数的增大而减小,随搜索点数的增加而增大,其值在0.1~0.4 g/kg范围内变化,当垂向坐标扩大300倍、搜索点数为6个时,插值效果较优。采用确定的参数对研究区的土壤盐分进行了三维空间插值,结果表明土壤盐分空间分布特征与实测值比较吻合,大部分区域土壤盐分含量小于2.5 g/kg,靠近北部和南部边界区土壤含盐量较低,属于非盐化土区,而大于4 g/kg盐化土主要分布在中间和南部局部区域。研究区80%土壤为非盐化土和轻度盐化土,20%为中度和重度盐化土。影响该区盐化土分布的主要因素有灌溉、局部地形、粘土层位置、地下水埋深和矿化度。当不同方向的取样间距相差很大时,选取合适的垂向坐标扩大倍数和搜索点数对保障3D-IDW法的插值结果精度至关重要。     

发展节水灌溉应注意的几个原则性技术问题

21世纪初期，我国将以空前的规模发展节水灌溉事业，计划安排大量的全国性节水灌溉项目。为了合理、高效地开展这些项目的规划、设计、建设与运行管理工作，使其节水效果好、经济效益高，提高出应注意以下五方面原则性的技术问题：节水灌溉的涵义与目的、技术措施体系、尺度效应、效果评估指标体系、主攻方向。并对这些问题进行了具体论述。     

Object‐Based Mapping of Karst Rocky Desertification using a Support Vector Machine

Accurate and cost‐effective mapping of karst rocky desertification (KRD) is still a challenge at the regional and national scale. Visual interpretation has been utilised in the majority of studies, while an automated method based on pixel data has been investigated repeatedly. An object‐based method coupling with support vector machine (SVM) was developed and tested using Enhanced Thematic Mapper Plus (ETM+) images from three selected counties (Liujiang, Changshun and Zhenyuan) with different karst landscapes in SW China. The method supports a strategy of defining a mapping unit. It combined ETM+ images and ancillary data including elevation, slope and Normalized Difference Vegetation Index images. A sequence of scale parameters estimation, image segmentation, training data sampling, SVM parameters tuning and object classification was performed to achieve the mapping. A quantitative and semi‐automated approach was used to estimate scale parameters for segmenting an object at an optimal scale. We calculated the sum of area‐weighted standard deviation (WS), rate of change for WS, local variance (LV) and rate of change for LV at each scale level, and the threshold of the aforementioned index that indicated the optimal segment level and merge level. The KRD classification results had overall accuracies of 85·50, 84·00 and 84·86 per cent for Liujiang, Changshun and Zhenyuan, respectively, and kappa coefficients are up to 0·8062, 0·7917 and 0·8083, respectively. This approach mapped six classes of KRD and offered a visually appealing presentation. Moreover, it proposed a conceptual and size‐variable object from the classification standard of KRD. The results demonstrate that the application of our method provides an efficient approach for the mapping of KRD. Copyright © 2012 John Wiley & Sons, Ltd.     

邛海盆地土壤氮素空间变异特征与影响因素研究

以西昌市邛海盆地为研究区域,随机均匀布点采集386个耕作层土壤样点,分析化验土壤理化性质,运用地统计学方法和GIS技术研究邛海盆地表层土壤氮素含量的空间变异特征,利用方差分析、缓冲区分析和回归分析定量分析区域内土壤氮素空间变异的影响因素。研究结果表明,研究区表层土壤全氮和速效氮含量分别为(1.85±0.51)g/kg和(138.5±47.7)mg/kg,属较丰富水平,变异系数分别为27.52%和32.24%,属中等差异强度;土壤全氮和速效氮具有中等程度的空间相关性,空间变异均以随机变异为主,具有各向异性特征,在西北-东南方向上空间变异相对剧烈;研究区土壤全氮和速效氮含量总体上呈条带状或斑块状分布特征,高值区主要位于西昌市的东南郊区,并以此高值中心向南、向东和向北3个方向逐步递减,低值区主要出现在邛海北面近湖岸地带。影响因素分析结果表明,土地利用方式、土壤母质、土壤质地、土壤p H值、城镇、河流、邛海湖对土壤全氮和速效氮空间变异具有显著影响,而道路对土壤氮素空间变异影响不显著。     

An entropy approach to spatial disaggregation of agricultural production

While agricultural production statistics are reported on a geopolitical – often national – basis we often need to know the status of production or productivity within specific sub-regions, watersheds, or agroecological zones. Such re-aggregations are typically made using expert judgments or simple area-weighting rules. We describe a new, entropy-based approach to making spatially disaggregated assessments of the distribution of crop production. Using this approach, tabular crop production statistics are blended judiciously with an array of other secondary data to assess the production of specific crops within individual ‘pixels’ – typically 25–100 square kilometers in size. The information utilized includes crop production statistics, farming system characteristics, satellite-derived land cover data, biophysical crop suitability assessments, and population density. An application is presented in which Brazilian state level production statistics are used to generate pixel level crop production data for eight crops. To validate the spatial allocation we aggregated the pixel estimates to obtain synthetic estimates of municipality level production in Brazil, and compared those estimates with actual municipality statistics. The approach produced extremely promising results. We then examined the robustness of these results compared to short-cut approaches to allocating crop production statistics and showed that, while computationally intensive, the cross-entropy method does provide more reliable estimates of crop production patterns.     

田间土壤特性的空间相关结构分析及其分布描述

本文对雄县试区试验田的土壤特性空间变异性进行经典统计分析，并利用地质统计学半方差分析法定量描述土壤特性的空间相关结构，然后使用Ｋｒｉｇｉｎｇ最优内插估值法得到了田间土壤特性参数的空间分布等值图。分析结果表明，该试验田０～１００ｃｍ土壤范围内的平均含水量不仅在整个空间分布上而且在纵横曲型剖面上都呈现出弱变异性，空间相关结构显著，相关距离约６０～８０ｍ。采用上述结论和等值图不但能减少样本采样的数量和密度，还能根据田间含水量的空间分布特征合理布点采样，实施土壤墒情的科学监测。     

基于结构相似度的关中平原旱情空间分布特征

季节性干旱是影响关中平原农业生产最主要的灾害,研究气候变化背景下的关中平原旱情空间分布特征和变化规律具有重要的科学意义与应用价值。基于关中平原2003—2014年每年3月上旬—5月下旬的旬时间尺度条件植被温度指数(VTCI)的干旱监测结果,采用结构相似度(SSIM)研究关中平原VTCI的空间变化特征及其影响因子。结果表明:关中平原VTCI的空间变化特征具有明显的区域差异性和空间异质性,结构性因素是VTCI空间变化的主要影响因子,总体上受水热、地形分布格局等因素的结构性影响,但微地貌、下垫面覆盖的不同及变化和人为因素导致其主体产生变化。当微地貌、下垫面覆盖类型和人为因素成为主导因子时,结构相似度与其高度相关,对其变化的响应非常敏感。与利用某些指数直接作为干旱的指示因子或构建统计模型分析干旱特征相比,引入研究图像的结构信息的参量SSIM实现了定量、准确、形象地描述干旱的空间分布特征和变化规律。     

土壤机械阻力的连续测定及空间变异结构分析

设计了一个土壤机械阻力连续测定系统。利用试验所得数据,初步探讨了土壤机械阻力的空间变异性和分形特征。结果表明,土壤机械阻力表现出空间变异结构,在一定范围内存在空间相关现象,用半方差法和功率谱密度法计算出土壤机械阻力的分维值分别为1.79~1.91和2.12~2.30。     

蛇腹鳞表面的超微结构及减阻机理

用原子力显微镜观测了竹叶青蛇、短尾蝮蛇和赤链华游蛇腹鳞表面的超微结构,分析了腹鳞表面的减阻机理。结果表明:3种蛇腹鳞表面的超微结构均为微凸体、微孔和凹坑周期排列的规律结构;蛇的栖息环境不同,超微结构的排间距、微凸体长度以及微孔的直径、数量不同。从陆栖到水栖,微凸体长度逐渐减小,微孔数量逐渐增加。微凸体减少了腹鳞和地面间的实际接触面积,从而减小了滑动时的粘着力;腹鳞表面的疏水性,减少了接触面间水的粘附力。